aFe POWER Momentum GT Cold Air intake

Ford edge ST 19-23 V6 Twin-turbo 2.7L

50-70094D (Dry Filter) | 50-70094R (Oiled Filter)

Red Mercedes C300 on White background

Power you can feel!
Dyno-tested for proven gains up to +24 HP / +28 lbs. x ft. Torque Max Gains
Outflows factory intake by 14%
Easy installation with minimalistic parts
Washable and Reusable air filter in high-flow Pro 5R or oil-free Pro DRY S

Polyurethane frame corner blue oiled engine aftermarket aFe air filter on white background

Dry air filter media on aFe aftermarket washable reusable drop in engine air filter

Aftermarket aFe Cold Air Intake installed on 2022 Toyota Land Cruiser J300

Learn more!

Easy install, and maximum power!

Videos

aFe POWER

If you are installing Terra Guard Rock Sliders or Trail Steps, we have found that adding a little bit of grease on the bolt to set the rivnut when using our provided tool.

Link to instructions, see page 7 https://afepower.com/media/catalog/product/file/79-27002_Ins.pdf

Important Note: Installing the rivet nuts is by far the trickiest part of this installation. Professional installation is highly recommended. If installing rivet nuts for the first time, purchasing a rivet nut setting tool is recommended. They are reasonably priced and available at your local hardware store or Amazon. Rivet Nut Setting Tool (not included) Your kit does include a rivet nut tool that works great when used with care.

If you decide to use our tool, follow the procedure below.

a) Insert the rivet nut into the hole flush to the panel.
b) Install the appropriately sized hex bolt and washer on the top end of the tool. Grease/oil the surface where the head and washer meet.
c) Install the star lock washer onto the bolt at the bottom of the tool. The star washer has a smooth side and a sharp side. Make sure the sharp side is facing the rivet nut. ** GREASE/OIL THE THREADS OF THE BOLT. **
d) Thread the bolt into the rivet nut, sandwiching the star washer. Once everything is finger tight, use a 10mm or 13mm socket and torque wrench to tighten the bolt while holding the tool stationary. The bolt should spin while rivet nut forms in place.
e) Tighten until you reach 6 ft-lbs for the 6mm bolts and 8 ft-lbs for the 8mm bolts.
f) Unscrew the bolt and move on to the next. Your kit includes a pair of each size bolt so you can use one bolt to set the rivet nuts for the driver side and one for the passenger side.

Terra Guard Rock Sliders/Steps Installation Video https://youtu.be/CtNZ5d3e0Xc
Terra Guard Rock Sliders / Trail Steps Design Concept Video: https://www.youtube.com/watch?v=5T6GAe7FtNY&list=PLCFvWWrkv2lI49tYBRsmVRD6G1Ppiggt9&index=2&pp=gAQBiAQB
Shop Terra Guard Sliders, Steps, Bumpers, Tub Rails & more on aFe POWER website: https://afepower.com/catalogsearch/result/?q=terra+guard&utm_source=youtube&utm_medium=video-description&utm_campaign=terra-guard

0:00 Intro
0:31 The provided tool
0:45 Grease the bolt
1:15 Start by hand
1:24 Torque Wrench
2:05 How a rivnut works

⏩ Website: https://bit.ly/3D55liD
Instagram: https://www.instagram.com/afepower
Subscribe to our channel for new product updates @afepower1

🚨 Questions? 🚨
FAQs/Customer/Tech Support: https://bit.ly/3OapjyU
Email: info@afepower.com
Call during business hours 8am-4pm PT +1-951-493-7100

🚨 Join our mailing list 🚨
For monthly Newsletter & New Product Announcements
https://bit.ly/3NK7x3V

#offroad #subaruoutbackwilderness #subaruoutback #afepower #overlanding #rocksliders #camping #subaru #subarulife

Helpful Tips On Installing Rivet Nuts on Subaru Outback Sliders / Steps

Shop now: https://bit.ly/3LptqF2

Plastic is weak! Opt for aluminum hot & cold charge pipes to boost power and stand up to the heat. Available in powder-coated black and red. Results are best seen with a tune or larger turbo.

See all aFe POWER Products for 4th Gen Tacoma including Cold Air Intake, Drop-In Filters, High-Clearance Cat-Back Exhaust, Loud Exhaust, and more: https://afepower.com/gas-trucks/toyota-lexus/tacoma/2024-tacoma?utm_source=youtube&utm_medium=video-description&utm_campaign=installation-video

Instructions: https://afepower.com/media/catalog/product/file/46-20724-R_Ins.pdf

Tacoma in video is 2024 TRD Off-Road

0:00 Intro / Parts
0:15 Removing stock charge pipes
0:35 Retaining clips, thread sealant
1:25 Couplers
1:45 Installing hot side
2:05 Installing cold side
2:32 Installation finished
2:45 Outro/truck

⏩ Website: https://bit.ly/3D55liD
Instagram: https://www.instagram.com/afepower
Subscribe to our channel for new product updates @afepower1

🚨 Questions? 🚨
FAQs/Customer/Tech Support: https://bit.ly/3OapjyU
Email: info@afepower.com
Call during business hours 8am-4pm PT +1-951-493-7100

🚨 Join our mailing list 🚨
For monthly Newsletter & New Product Announcements
https://bit.ly/3NK7x3V

#toyotatacoma #tacomatrdpro #aftermarketparts #coldairintake #chargepipes #truckmods #turbo #turbocharged #offroadtrucks #toytaco #2024tacoma

Aluminum Hot & Cold Charge Pipe Kits For 4th Gen Tacoma

Our June 2024 Cars & CaFe was a huge success. Thanks for all those that came out and stay updated on our Facebook page for our next events: https://www.facebook.com/afepower/

⏩ Website: https://bit.ly/3D55liD
Instagram: https://www.instagram.com/afepower
Subscribe to our channel for new product updates @afepower1

🚨 Questions? 🚨
FAQs/Customer/Tech Support: https://bit.ly/3OapjyU
Email: info@afepower.com
Call during business hours 8am-4pm PT +1-951-493-7100

🚨 Join our mailing list 🚨
For monthly Newsletter & New Product Announcements
https://bit.ly/3NK7x3V

#socal #carmeets #carsandcoffee #riversidecounty #inlandempire #carmeet

June 2024 aFe POWER Cars & Coffee in Corona, California

Learn more: https://bit.ly/4cyQlcN Increase flow and add dyno-proven horsepower and torque for your F56 B46 MINI Cooper S with aFe POWER Momentum Sealed Cold Air Intake. +28% Flow Increase +10 HP Horsepower +19 Lbs. x Ft. Torque

Choice of high-performance oiled filter and easy maintenance dry filter.

Fitment:
2014-2024 Mini Cooper / Cooper S / Clubman / Countryman / John Cooper Works (F54 / F55 / F56 / F57 / F60)
2016-2022 BMW X1 sDrive28i / xDrive 28i (F48)
2018-2023 BMW X2 sDrive28i / xDrive 28i (F39)
2020-2024 BMW 228i xDrive Gran Coupe / Gran Coupe (F44)

See full fitment details:
Part number: 50-70097 https://afepower.com/afe-power-50-70097d-momentum-gt-cold-air-intake-system-w-pro-dry-s-filter?utm_source=youtube&utm_medium=video-description&utm_campaign=intake-install
Part number 50-70068: https://afepower.com/afe-power-50-70068r-momentum-gt-cold-air-intake-system-w-pro-5r-filter?utm_source=youtube&utm_medium=video-description&utm_campaign=intake-install

0:00 Intro
0:50 Henry
1:00 MAF Sensor Explanation
2:26 Intake Sound

⏩ Website: https://bit.ly/3D55liD
Instagram: https://www.instagram.com/afepower
Subscribe to our channel for new product updates @afepower1

🚨 Questions? 🚨
FAQs/Customer/Tech Support: https://bit.ly/3OapjyU
Email: info@afepower.com
Call during business hours 8am-4pm PT +1-951-493-7100

🚨 Join our mailing list 🚨
For monthly Newsletter & New Product Announcements
https://bit.ly/3NK7x3V

#minicooper #minicoopers #johncooperworks #minijcw #jcw #clubman #countrymans #bmwx1 #bmwx2 #grancoupe #coldairintake #aftermarketparts #minicountryman #miniclubman

How to Install MINI Cooper S AFE Momentum Cold Air Intake (MAF Sensor Information)

Social Media