header-videos

Visit our aFe POWER YouTube channel below!

aFe POWER

Step-by-step installation you can do yourself. Learn more: https://bit.ly/47iwpZ2

⏩ Add dyno-tested gains up to +25 horsepower and +31 torque with this 2-1/2-inch–3-inch 304 Stainless Steel hand-welded piece featuring a high-flow muffler for deep sound.

⏩ Fitment:
- Non-TRD & Other Models: Hi-tuck design (49-36069) https://afepower.com/afe-power-49-36069-vulcan-series-2-1-2-in-to-3-in-304-stainless-steel-cat-back-exhaust-system?utm_source=youtube&utm_medium=video&utm_campaign=exhaust-video
- TRD Model: Cut-out for exhaust tips that require TRD rear bumper (49-36068) https://afepower.com/afe-power-49-36068-b-vulcan-series-2-1-2-in-to-3-in-304-stainless-steel-cat-back-exhaust-system-w-black-tip?utm_source=youtube&utm_medium=video&utm_campaign=exhaust-video

0:00 Intro
0:12 Completing installation on a lift is recommended, otherwise, the rear section of the OE exhaust may need to be cut in order to be removed from the vehicle.
0:15 STEP 1 Remove the OE Bolts and Springs at the front of the vehicle's exhaust. Retain the hardware; it will be re-used for installation.
0:27 STEP 2 Remove the OE exhaust hangers from the isolators. Be careful not to damage the isolators.
0:47 STEP 3 Lower the front of the OE Exhaust, then snake the exhaust's rear portion around the rear axle and remove it from the vehicle.
1:05 STEP 4 Install the aFe POWER Y-Pipe onto the OE Catalytic Converter using the OE Springs and Bolts. Install the aFe POWER Passenger Side Front Pipe onto the aFe POWER Y-Pipe using the supplied 2-1/2" Band-Clamp. Do not fully tighten the band clamp to allow for adjustment.
1:28 STEP 5 Install the aFe POWER muffler assembly with the supplied 3" band clamp and install the hangers into the vehicle's isolator mounts.
1:46 STEP 6 Install the aFe POWER over-axle pipe with the supplied 3" band clamp and install the hangers into the vehicle's isolator mount.
1:57 STEP 7 Install the aFe POWER connection pipe with the supplied 3" band clamp.
2:05 STEP 8 Install the aFe POWER Tailpipe (For non-TRD models: Hi-Tuck Tailpipe- 49-36069 and for TRD model: Tip-assembly tailpipe- 49-36068) with the supplied 3" band clamp and install the hangers into the vehicle's isolator mounts.
2:31 STEP 9 Start from the front of the aFe exhaust system and evenly tighten all clamps and fasteners.

Hear it in action: https://www.youtube.com/watch?v=FFM4da2t2U4

⏩ Website: https://bit.ly/3D55liD
Instagram: https://www.instagram.com/afepower/
Subscribe to our channel @aFePower1

⏩ Questions?
FAQs/Support: https://bit.ly/3OapjyU
Email: info@afepower.com
Call during business hours 8am-4pm PT +1-951-493-7100

⏩ Get tech tips & product updates straight to your inbox: https://bit.ly/3NK7x3V

#sequoiatrd #toyotasequoia2023 #toyotasequoia #trd #exhaustsound #installationguide #mechanictips #installationvideo #lexusgx470 #lexusgx460 #toyotatacoma #toyotatundra

How To Install aFe POWER Toyota Sequoia Cat-Back Exhaust

Add a whopping amount of horsepower and torque and deepen your exhaust note to a deep rumble. Order now! https://bit.ly/47iwpZ2

⏩ Add dyno-tested gains up to +25 horsepower and +31 torque with this 2-1/2-inch–3-inch 304 Stainless Steel hand-welded piece featuring a high-flow muffler for deep sound.

⏩ Fitment:
- Non-TRD & Other Models: Hi-tuck design (49-36069) https://afepower.com/afe-power-49-36069-vulcan-series-2-1-2-in-to-3-in-304-stainless-steel-cat-back-exhaust-system?utm_source=youtube&utm_medium=video&utm_campaign=exhaust-video
- TRD Model: Cut-out for exhaust tips that require TRD rear bumper (49-36068) https://afepower.com/afe-power-49-36068-b-vulcan-series-2-1-2-in-to-3-in-304-stainless-steel-cat-back-exhaust-system-w-black-tip?utm_source=youtube&utm_medium=video&utm_campaign=exhaust-video

How To Install... https://youtu.be/FFM4da2t2U4

⏩ Website: https://bit.ly/3D55liD
Instagram: https://www.instagram.com/afepower/
Subscribe to our channel @aFePower1

⏩ Questions?
FAQs/Support: https://bit.ly/3OapjyU
Email: info@afepower.com
Call during business hours 8am-4pm PT +1-951-493-7100

⏩ Get tech tips & product updates straight to your inbox: https://bit.ly/3NK7x3V

#sequoiatrd #toyotasequoia2023 #toyotasequoia #trd #exhaustsound #aftermarketparts

Hear the aFe POWER Toyota Sequoia Cat-Back Exhaust

Learn more! https://bit.ly/3sAMES9 Terra Guard steps, sliders, and bumpers inspired by the outdoors and the adventures that take you there. Designed by an avid mountain biker to make roof access easy.

For those rock-crawling and traversing technical trails, Rock Sliders protect the Outback's rocker panels and pinch rails with no loss of ground clearance. The Trail Steps share some design elements but shift the focus on reaching the roof line for easy access to storage or the loading and unloading of gear. The Front Bumper provides front-end protection and mounting points for lights, tow shackles, and winch mounts.

3D scanned, CAD designed, hand-welded, built in California.

⏩ Website: https://bit.ly/3D55liD
Instagram: https://www.instagram.com/afepower/
Subscribe to our channel for new product updates @aFePower1

⏩ Questions?
FAQs/Support: https://bit.ly/3OapjyU
Email: info@afepower.com
Call during business hours 8am-4pm PT +1-951-493-7100

Get tech tips & product updates straight to your inbox: https://bit.ly/3NK7x3V

#subaru #subaruoutback #subaruforester #subarucrosstrek #subaruoffroad #overlanding #mountainbiking #mountainbike #campingcar #campinggear #outbackwilderness

Terra Guard Overlanding Rock Sliders, Trail Steps, & Bumper For Subaru Outback

⏩ Shop now https://bit.ly/45RKY4o Add dyno-tested gains up to +12 HP & +14 TQ with the Takeda Cold Air Intake

⏩ The perfect upgrade for enthusiasts looking to boost performance on an 11th-gen Civic or 5th-gen Acura Integra. Increase airflow and boost horsepower, torque, throttle response, and acceleration.

0:00 Intro
0:15 Remove stock airbox
0:45 aFe POWER Takeda Cold Air Intake
1:20 Installing Cold Air Intake
2:10 Dyno-chart

• Easy modification with no tune required for the Civic or Civic Si for maximum gains
• Dyno-tested on 2022 Civic Si to gain 12 more HP horsepower and 14 LB-FT torque with the high-flow Pro 5R filter
• Choose between a high-flow Pro 5R oiled filter or easy maintenance Pro DRY S filter, both washable and reusable, designed to last the lifetime of your vehicle.
• Clean OE+ look with an import-styled twist
• Quality, made-in-the-USA filter, tube, and airbox

⏩ Fitment:
2023-2023 Acura Integra L4 1.5L (t) Gas
2022-2023 Honda Civic L4 1.5L (t) Gas
2022-2023 Honda Civic Si L4 1.5L (t) Gas

⏩ Hear the Cat-Back Exhaust for Civic Si https://www.youtube.com/watch?v=iyeiIOwxbYU

⏩ Website: https://tinyurl.com/AFE-WEBSITE
Instagram: https://www.instagram.com/afepower/
Subscribe to our channel for more videos @aFePower1

🚨 Talk to us
FAQs/Customer/Tech Support: https://tinyurl.com/AFE-Contact-Us
Email: info@afepower.com
Call during business hours 8am-4pm PT +1-951-493-7100

#hondacivic #civicsi #acuraintegra #integra #hondacivicsi #aftermarketparts

Takeda Cold Air Intake Installation On Honda Civic Si